The natural parquet, which in the 18th century covered the floor of the tsar’s chambers, was made completely of solid wood – oak, maple, nut, cherry and was very expensive, exclusive material. In the 20th century, a cheaper one was invented and introduced into circulation, but in its qualities the material differing from the older brother. This is a parquet board. It is not harmful to human health, very strong and durable, has a pleasant and natural appearance. Then, due to what it fell so much that it became in our time an affordable and common method of flooring? It turns out that only the upper layer of the parquet board consists of expensive solid wood and is carefully selected according to the pattern, shades of color, texture. This layer can be from 0.5 to 6mm thick. The middle layer of the board consists of coniferous wood, and not of a whole piece of wood, but from glued plates. The manufacturers do not perpendicularly relative to the upper and lower layer, for the greater strength of the material, this layer of the parquet board. And finally, the third layer of board, also consists of coniferous wood in the form of a plywood layer 2mm thick. The location of the layers of the parquet board is a precisely verified mechanism so that your sexual coating is resistant to temperature changes, moisture changes. The upper and lower, perpendicular layers hold the middle layer, and accordingly the entire board from deformation. The maximum length of the parquet board offered by manufacturers reaches 3 meters, width 20 meters, and thickness 22 meters. The wood from which the upper front layer of the parquet board is made is so diverse that you can easily pick it up in color and drawing so that it suits your taste and fit into the interior of the house.
Add A Comment