Making repairs in the bathroom, most likely you decide to replace the old plumbing. Consider how to install a new acrylic bath yourself.
Although it weighs quite a bit, it needs to be installed not only on the legs, but also on a special frame. The legs here will more perform the function of the weight distribution regulator. Before installing an acrylic bath, you need to prepare first.
Then, the place where it will be, you need to first clean and bring hot and cold communications. The drain pipe should not be installed above10 centimeter floor. If you have chosen a bath with hydromassage, then you should take care of the wiring in advance.
It is necessary to bring the pipes of water supply and sewage so that later the bathtubs are tightly adjacent to the wall. Otherwise, the joints will not give in to sealing, and the water will fall past the bath. Moreover, the pipes should be located in the public domain.
If you are interested in a profile metal pipe, then we advise you to go through the link indicated by us. There you can buy a profile metal pipe.
The sewage system is mounted using a water plant. After that, the panels, mixers and electrical equipment are installed. Acrylic bathtub is mounted on a prepared platform using supporting legs.
If you do the work correctly, then the life of the bath will be at least 20 years. You should try to fit into the overall interior of the room. If the bath is too low, then for additional support you can use brick.
After the bath is installed, it needs to be checked and sealing joints. Before starting the seal, the bath should be filled with cold water. The load will help plant the product, and this, in turn, will not allow sealant to move away from joints.
Thus, you can independently install an acrylic bath.