The procedure for setting the beacons includes the following operations:
– exhibition and alignment of the beacons;
– plastering the surface of the walls in the interval between beacons;
– extracting the beacons and shaving seams.
On the wall trimmed with soil, the points of installation of the existing beacons are preliminarily marked.
On the line drawn by the perforator vertically or drill drill holes for fastening.
Choose a step in correspondence with the size of the rule. Use for convenience everyone beloved by the builders of dowels. The size is assigned “on the situation”, but often six are used for eighty. Usually carrying out construction and installation work first of all, start by setting the beacons.
Having laid the fasteners along the wall, before establishing beacons under plaster, they begin to align in the level of self -tapping screws. By twisting or twisting the screwdriver with a screwdriver, settling on the values of the level, reach the location in which their heads are located in a single plane.
This operation is responsible and will require a certain share of scrupulousness and attention.
It must be remembered that the target of such an operation is considered a small thickness of the layer of plaster with an impeccable plane of the surface. For hardness, sometimes resort to stretching the thread among the screws along the diagonal direction of the wall. The point of crossing the threads certifies how correctly the work is performed.
Installation of beacons for plaster is always carried out in a single plane to purchase a smooth surface. Plaster beacons are always metal and wooden, and play the role of a long flat strip several meters in length and one to two centimeters in width. Metal beacons are produced at a metal factory, which is processed from a stainless layer – galvanized.
Neatly peeled and pulled beacons can be used a considerable number of times