House insulation material based on mineral wool, basalt materials on the Internet posted a uncountable number of positive reviews of developers. Attracts such material with its convenience in use, low cost, long service life and most important – quality. Actually, therefore, buyers make a choice in favor of basalt isolation. Such merits of these fibers are largely due to their composition and structure. Call insulation mineral wool because the fiber consists of very thin threads that are anarchically intertwined with each other. And between these fibers there is air – not so what a heat conductor. Of the positive qualities, good strength can also be noted, with medium weight. Due to the stone base of the fiber, insulation is very resistant to the effects of high temperatures and aggressive chemicals that are in the atmosphere or any solution, while its characteristics remain the same. Also, the isolation reduces the noise into the adjacent room by an order of magnitude, which is why it is one of the most popular impeller materials. Heater production is performed in two types: roll insulation and isolation in the form of plates. The progenitor of such materials was rolled isolation. Its use in the insulation of horizontal surfaces (ceilings, roofs, etc. D.) Insulation in the form of plates is strict, so it is less convenient for wall insulation. The insulation layer outside should be 200-250 mm. But often the thickness of the material, as a rule, slabs-50-100 mm. Therefore, they put several rolls (plates), which, by the way, even gives some advantages, because in this case the layers can be placed into a wrapping (so that the seams of the first row are closed by the second row roll) to increase insulation qualities.
Add A Comment