The lining, as a rule, is a profile made of pine wood. The life of such a finishing material is quite decent, and the installation process is not special technologies. If you make lining of the balcony lining, then the lining of balconies with lining does not take much time if you have all the necessary tools at hand. It is only necessary to stock up on time and patience. To install the lining on the wall you need a frame. To create a frame for vonking, bars of 15×30 millimeters or 20×40 millimeters are used. Depending on the evenness of the wall, the complexity of the structure of the frame will also depend. If the wall is flat, then the time and effort will be spent minimally. In this case, the bars can be attached directly to the wall using the fast installation dowels. With an uneven wall, you will have to use the lining bars and constantly monitor the vertical of the construction of the frame using the building level. After creating the frame, you can proceed to the actual installation of the lining. This can be done in two ways: using nails or using special clips.
The main aspect is the installation of the first board. All wall sheathing will depend on the correct installation. Therefore, the first board is attached to the construction level, withstanding the evenness of the styling.
When using nails to install the lining, they must be scored at an angle from the side of the furrow. After that, the next board is inserted into the furrow and the process is repeated. To fit the boards, you need to use a hammer and a bar.
When using the clip, their fastening is carried out to the furrow, as a result of which the bar is fixed. The clip is attached to the frame using nails or a construction stapler.
After installation of the lining, it is necessary to finally complete the wall finish. For this, joints at the corners are closed with special wooden corners, and a skirting board is installed below.