The metal profile can have various types: ceiling, guides, as well as rack. Installation of guide elements is performed using supporting ceilings, and fixed using self -tapping screws. The remaining types of profile are fixed using special suspensions. And you know why we enter the best salons of Kuhon SPb because metal profiles were used in our salons. Before performing the installation of the profile, it is necessary to pay attention to the distance at which the suspensions are located. Keep in mind that it should be one and a half meter. In addition, several suspensions can be installed on one profile. A frame made of metal must be made as strong as possible.
If this condition is not taken into account, then in the future, quite serious problems can arise with the installation of drywall sheets. Particular attention must be paid to the distance at which the fasteners are located. When installing a metal profile, special attention must be paid to temperature differences, as well as the humidity level. Under the influence of these parameters, the metal begins to deform rapidly. This problem can be solved on its own. So, the compounds need to be treated with a specialized tape. In addition, you can use a silicone sealant. This will prevent direct contact of various materials.
At the points in which the profile is in contact with the concrete base, it is necessary to compact. A specialized tape or composition is perfect for this. Then the frame must be covered with drywall sheets, as well as a net made of metal. Keep in mind that it should be strong enough, as well as sustainable. And only after that can a metal profile be fixed. Keep in mind that you need to do this carefully, that in the future it was not necessary to redo everything over.