Before thinking about the flooring of such material as linoleum, first of all, all the different irregularities should be removed that are characteristic of the plank sex. The leveling of the plank floors is carried out using suitable plywood sheets, the choice of which should be carried out according to the following scheme: the thickness of the material should increase in proportion to the number of irregularities of your gender. In the form of additional insulation for your gender, you can use a special roll insulation, its basis in most cases is mineral wool. During the sheets of plywood sheets, the sizes of the floor, the remaining extra pieces should be trimmed. Now very often after a link, you can find useful information.
After the plywood sheets are laid, their strength should be assessed, but it is done simply: you need to walk along them. If in the process of testing there are some areas where the plywood sheets are sagged, pieces of wood chopped slab (fiberboard) should be placed under them. Those places where individual plywood elements are united among themselves can be filled with silicone or foam. The most optimal option for fastening plywood sheets in the process of aligning such gender is the screws that are not recommended at this stage to drive up to the very end. In those places where plywood sheets are sags, fastening to drive is unacceptable at all. Then, once again you should walk along the acquired flooring, checking these actions, how firmly the individual elements are firmly fitted to each other.
If the result of this test satisfied you, then in this case you can safely begin to drive the fasteners to the end, up to the drowning of their hats in the material.
Immediately after the end of this stage of work, you can proceed to the process of flooring for the floor, directly of the linoleum itself.