Today on the market the cost of keramoplast is much cheaper than that of asbestos -cement slate, for example, in our country this is the most common material. High sound insulation, small thermal conductivity, has a keramoplast. The coating of this material is able to withstand even an avalanche, and strength is at a very high level, if the sheets are kneled correctly, they can transfer any weather loads. To doom, it is better to use the boards of thickness at least twenty -five millimeters, and the width of which should be one hundred and fifty millimeters. Between the first and second Reshetin, an opening of eighty millimeters is determined two hundred and two. The end overlap of a sheet of keramoplast is one hundred millimeters, and the lateral fifty millimeters.
Roofing – seventy -five millimeters. Millimeter paper, the need for roofing sheets is determined, and at the same time the end and lateral overlap is taken into account. All wooden devices of the roof are impregnated with an antiseptic before making roof installation, and are also processed by a fire retardant. Keramoplast fits as well as EuroShifer. All sheets are laid in the horizontal direction, against the direction of the wind. Further, the layers are mounted with a displacement so that the joint, the first row was equal to half a sheet of the second row.
Then the laying of sheets in a large thickness will not happen. Can be fixed and using the usual method without shifting the sheets, then the corners of the oncoming sheets will have to be cut. If the roof is large, then to simplify the installation, first lay the first row, and then at an angle of ninety degrees, lay the side or main row. For the final consolidation of all sheets, it is necessary to check the installation of side and end overlays. Here the cord is used in a stretched form, and the mount is made along the line drawn on the crate, if the crate is even and properly exhibited, according to the tearing of the gratin, then everything is true.