The vinyl coating is laid on a flat surface and of course dry. But before installation, the tiles are taken out of packages and laid out for independent alignment. After the tile is prepared, it can be laid out. We will make tiles from the far corner of the room. We take the vinyl coating bar and cut the upper only cut strip with a sharp knife and put the tile to the wall with this side.
Today, many people who have their own children buy a ketler swing and make a playground in their site or in the yard. You can buy a ketler swing currently without leaving your home, go through the link we have given and you can order a swing with delivery at a low price.
Retreating from her several millimeters. The protruding lower part of the tile is aimed at the next row. So we lay tiles of the first row along the entire far wall. The second row. We take the tile and shorten it for a third. Next, we attach to the first row and close. Then a whole tile lays down, and the second row can be laid completely from shortened plates. Tiles are cut very easy. The tiles of the next rows are also laid with a displacement so that the seams are not suppressed, and there was a beautiful pattern.
The subsequent rows are overwhelmed by the previous one, connecting the edges, reliably hold on to each other.
After the entire floor was fixed, the vinyl coating must be crushed. You can walk on it or ride a roller. If the room is cold, then vinyl tiles are heated with a hairdryer and trampled.