In any apartment, and even in the new there may be uneven walls. Which are most often formed due to joints between the plates, or their wavy surface.
Putting this flaw will help to eliminate this flaw and plaster walls. Putty is a simpler method with which you can remove small irregularities, but the plaster will hide more noticeable irregularities. To reduce the costs of materials for plaster walls, and save your time – you can scattered only those walls where irregularities are most noticeable, and which will be in sight.
For example, part of the wall where the skirting board will be attached. You can check the irregularity of the wall can be applied by applying an even block. If you see a gap between the wall and the bar, this is a sure sign that the walls need to be aligned. Depending on the size of the gap? you need to choose a method, aligning – putty or plaster. Before the procedure begins, aligning, the wall must be well prepared, cleaned from the layer of old putty and loaded with a mixture of water and PVA glue.
If the walls require plaster, pay attention to simple rules that will help avoid errors in the future, and directly when performing work. If you take the brick walls in the warm season, and especially in summer, then the walls need to be moistened. Immediately after applying plaster solution, it is necessary to level the surface so that it does not have time to dry and create new bumps. Adhering to these two simple rules, you will give the walls perfect evenness.
Interested in the possibility of installing a stretch ceiling in the Moscow region? You are on the right track! You will learn all the necessary information on the website of the company “Delit” at Potolok-Shop. Trust professionals and get the best result!