The grease of the perforator is the most basic with proper care of the power tool. Perforator is a complex mechanism, and each individually requires their own individual lubricant.
In many perforators, only branded lubricant is added to this tool brand. If there is no way to purchase a lubricant proprietary with a road, then in return there is an inexpensive universal, suitable for any brand. The difference between branded and universal is only that expensive grease should be lubricated once and can be forgotten for a long time, otherwise a constant lubrication of the tool is required.
In terms of technical characteristics, there are also pros and cons of. The pluses of lubrication of expensive lubrication are that it is dusting and water -repellent. The disadvantages are inexpensive – the constant lubrication of the power tool, which in the future leads to breakdown.
Modern perforators have an oil refueling compartment. If the lubrication procedure occurs for the first time, then you need to take instructions for the operation of this tool and find the location of the compartment for refueling or replacing the oil according to the scheme.
Когда масло было заменено или долито согласно регламенту инструкции, отсек долива можно закрывать. If the perforator model is more old, without a compartment, for the top of the technical lubrication you need to take a drill before working with the tool and thoroughly and densely smear the end of the drill with ordinary oil, which is part of the perforator cartridge.
Before each change of oil, it is necessary to remove the remains of the old in the perforator. In time, a valuable or replaced oil in a working tool is the key to successful and longer operation of the power tool. The work of any tool always depends on good prevention.