Close Menu
  • News
  • Tips
  • Travel
  • Technology
  • Sport
  • Life style
  • Society
LoopyIdeas – the best ideasLoopyIdeas – the best ideas
  • News
  • Tips
  • Travel
  • Technology
  • Sport
  • Life style
  • Society
LoopyIdeas – the best ideasLoopyIdeas – the best ideas
Home»Tips»Bulk floor: how to prepare the base correctly

Bulk floor: how to prepare the base correctly

November 12, 2018

Any floor covering should have a strong and even base under it. There are special machines from China using these machines you can easily make a bulk floor. And also to make such a coating is quite possible and with your own hands. Consider in stages the procedure for filling the finish -free floor.

Preparation of the base

One of the important stages in the preparation of the base for the moisture is a damping tape. It must be laid or glued along the perimeter of this room. Now arising linear extensions, in the places where the screed and walls are adjacent, compensates for the tape.

Clean the surface of dust and dirt with a brush. We shed the foundation of a deep penetration primer. This will enhance the clutch of the base and the filled material. The soil should dry for 30-60 minutes.

Installation of the beacons

When working with a large room, uniformly applying the mixture is quite problematic, in such cases, lighthouses are installed. With their help, the area is divided into areas. For a small layer of screed, I use metal beacons. For a layer of 2 to 10 cm, a metal profile (tubes, corners) is used). They must be fixed with a solution. Lighthouses are pressed into the solution and aligned with the level. The voids are filled with a spatula under the beacon. This is done to form the boundaries of the sites, so the solution will not spread over the entire surface of the room.

The driving time of the beacons depends on the solution used and the thickness of the layer.

Pouring the bulk weeping the solution. The required amount of water is first poured into the container, and only then a dry mixture is poured out. It is important to always observe the proportions indicated on the dry mixture.

The induced portion of the solution is poured to the floor and rolled with a special roller (aeration needle), thereby the solution is distributed along the plane and the air that came into it is expelled.

We pour to uniform filling of the entire area. If lighthouses were used in the process, then such areas are filled with alternating with empty ones – according to the application technology.

Share. Facebook Twitter Pinterest LinkedIn Tumblr Email

Related Posts

A good businessman is one who always develops and learns new things

April 11, 2025

Dispelling myths about high earnings for beginning businessmen

April 11, 2025

Businessmen seek profit in everything, even in people: is this true?

April 11, 2025

How to use plants to divide the plot into zones

January 23, 2025
Add A Comment

Comments are closed.

Latest Posts

What is SaaS and how can you make money on it?

April 11, 2025

Author’s tour: concept, types and ideas of organization

April 11, 2025

Basics and stages of opening a tour operator company

April 11, 2025

Tourism business ideas: what you need to know

April 11, 2025
Most popular

Installation of wood stairs: how to do it with your own hands

October 24, 2018

High -quality metal tiles: what is, pluses

May 28, 2018

Solution of practical housewives: what material is chosen

August 19, 2019
LoopyIdeas – the best ideas
  • News
  • Tips
  • Travel
  • Technology
  • Sport
  • Life style
  • Society
© 2018-2025 LoopyIdeas - loopyideas.com.

Type above and press Enter to search. Press Esc to cancel.