Starting the construction of the roof of the house, do not forget that the roof of the house is a very important part of it, which also consists of many coherent parts. But still, the most dominant detail is still considered and is also a rafter system. It is a kind of frame structure on which all physical hardships will be assigned. The rafters can be made of reinforced concrete or from any type of wood. But still, rafters from natural material are more often acquired. And there is a simple explanation for this. Wooden rafters weigh relatively reinforced concrete quite a few, which allows them to be easily both to shake the construction site and most importantly and use them for their intended purpose, that is, build a roof from them. On the only selection of rafters, work on the roof does not end, but rather, on the contrary, it just begins to move forward. Next, it is required to choose the right special materials for insulation and waterproofing of the roof, which will work on a dry and warm atmosphere in the abdter space of the built roof. To do this, we need welding geomembrans. The roofing insulation is afraid of moisture, because it gradually spoils it over time. Therefore, by mounting the insulation material, a waterproofing film is attached on top. If a lot of water falls on the film, it begins to drain down it down the street, and with increased dampness in the roofing space, a ventilation system is used. In each residential building, a subcutaneous space is necessarily constructed, it contributes to the circulation of air flow. This undercarbon space is built from 2 structures, which are called a crate and a counterparty. At the beginning, the counterparty is mounted and the crate is laid on the top of it.
Add A Comment