The plasticizer C3 is a plasticizing addition that is used in the production of concrete, monolithic reinforced concrete structures, paving slabs, etc. This product is highly effective for the manufacture of super -strength concrete of the B40 brand and above. The plasticizer is best used to produce a concrete mixture with the addition of small sand and a non -standard species aggregate.
Produce a plasticizer in liquid (aqueous dark brown solution with a concentration.32%) and dry form (soluble powder in water), which serves as an addition to the solution and concrete mixture. Currently, the plasticizer with 3 can be bought in dry form, this additive is packed in paper bags of 30-50 kg, as well as in non-hardeous containers such as MKR to one ton, delivered by rail and vehicles. The supplement in liquid form is delivered in car and railway tanks of different volumes.
The plasticizer C3 has a number of advantages, using this additive can be achieved as follows:
– increase in concrete strength by 30-50% (due to low water consumption);
-an increase in the mobility of the mixture of concrete P1-P5 without reducing the durability and strength of concrete;
-obtaining concrete with high corrosion resistance, frost resistance, water resistance;
-reduction in cement consumption by 15-25%;
-A significant reduction in time and energy resources for concrete vibration. mixtures, and in some cases you can not vibrate at all;
-Reducing energy and time for processing concrete (heat-pump)
The plasticizer C3 has a warranty period, it is stored for one year. In dry form, the supplement is stored in closed warehouses in factory packaging. In liquid form, the additive is stored only in closed containers with a temperature of at least ten degrees. When working with a plasticizing addition, you need to use protective equipment.