Parquet is a fairly popular flooring, because it is durable, beautiful and quite environmentally friendly. However, with prolonged operation, its surface, like any other, begins to wear out. The original appearance is lost; there are rather deep scratches on the surface, irregularities due to improper masonry, and insignificant clum defects. It is possible to even fall out of planks or warping. That is why the parquet must be properly careful and, if necessary, repair it in time. There are various ways of repairing parquet, but the best of them is a complete replacement of damaged areas. You can perform it yourself or contact professionals who are repairing a parking lot in Moscow. If you still decide to update the parquet on your own, then the following few tips will be useful to you:- First of all, before putting a new parquet, first clear the place for it, that is, remove the pollution and small garbage; For example, the parquet strips are glued to the base on the base;- in the case when, after the end of the replacement of the planks, the mastic performed between them, it is recommended to remove surpluses with a chisel, but it is strictly prohibited to use any solvents, since they can damage the parquet itself; – after replacing the planks, the parquet is finished or all defects are removed in already repaired areas;- most often such a defect as a gap is manifested. They are covered with a specially designed manner or wooden rails;- if you use rails to seal cracks, then it is necessary that they are made of the same wood as the parquet itself;- in the case when the parquet is just a little, it You can just polish again and paint with varnish so that it looks like new.
Add A Comment