Each owner wants his house to be not only comfortable, but also warm. To do this, it is necessary that the walls of the house are quite insulated. For insulation of the house on the outside, all kinds of heat -saving materials and materials for isolation are used. They must protect the walls of the house from various conditions of the external environment, rain, snow, and winds.
There are several ways to warm the walls of houses. It is best to use the branded facade insulation systems, as this excludes errors in the selection of materials. When the walls are warming with mineral panels, holes are drilled in the walls, into which wooden plugs are driven. Broaches are vertically attached to them, between which the heater slabs are attached. Then it naits the rails, sheets of asbestos are attached to them and closed with plaster solution.
One of the options for insulation can serve as insulation by polystyrene foam. Plates from the heat -insulating material are glued to the prepared walls of the facade. The surface of the plates is covered with a plaster solution, according to a special plaster mesh.
When spraying polyurethane, a high degree of protection against moisture and heat conservation is achieved on the outer surface. Polyurethane foam is applied to the walls in several layers, then stained.
For wall insulation, a lime-gypsum solution is used outside. It is better known as the “wet facade”, or facade insulation. It is not very expensive in price. Wall surfaces must be cleaned of dust. Plaster is applied to the prepared wall. You can use perlite plaster, which is applied in several layers.
The durability of external facade insulation is calculated for decades, subject to a special technology, for each method of insulation separately.