At the moment, the technology of organizing wooden floors is the installation of wooden elements over previously installed lag. This method is equally popular both when arranging wooden floors and when laying the bases for other finish coatings.
As already mentioned, the main elements of the wooden floor are wooden lags without which the installation of these sexes is simply impossible. It is also worth noting the importance of such elements as brick columns, skirting boards and a striped coating as a waterproof plywood, chipboard and some other materials can act as.
In the event that work is underway on the organization of a black wooden floor under the flooring of any finish material, the builders have the opportunity to use an unspeakable board, which is significantly cheaper. But if it is equipped with a finishing floor, you can use only dried chopped and polished boards in the design of which groove joints are already made in advance, as well as the ventilation openings.
First of all, before laying a wooden floor, it is necessary to cut all the elements. That is, to fit and calculate everything so that the end joints of the boards have to be exactly in the middle of the laid lag. This is very important, because if you error these calculations, you can simply lose a whole bunch of forest.
Using milling boards, it is necessary to remember that when laying them, you need to dock them using wedges and planks, since it will not be enough tight pressing.
As for the fastening itself, it is produced using nails and accordingly the hammer. Moreover, it is worth noting that the hats of nails need to be shed in boards by at least 2 mm. By the way, in order to hide the resulting excavations, you can use the label on wood.