The panels must be installed so that the seams are in one direction that belong to the longitudinal seams. The panels can be installed on the old type of surface in the form of drywall, slabs and other surfaces of the structure. If you really want to, then you can install these objects on the crate. Here the main thing is to decide on the method of installation and design. Wooden entrance doors must match the ceiling.
The ceiling panels can be attached using a stapler or it is possible to use the nails of the finish. So when installing the ceiling panels on the already old ceiling coating, you must first make sure of the fortress of nails or scrapers on this surface. The length of the paper clips and nails should be at least fourteen millimeters.
Ceiling panels can be attached to the surface of the ceiling using two ways. One method includes parallel correlation of the racks of the crate, and the other type involves diagonally. If the panel is located diagonally with respect to the crate, then where the mount is located, it should be something safe. For example, at least two clips. Next, you need to make sure that this paper clip did not disappear into the connection. If you really want, then you can cover these ceiling panels on top with paint. To do this, you will need to use the paint water-solid, a fairly wide brush and a painting roller. If in the future you need tissue painting of these panels, then for this you will need to use a roller and a water-red mixture of the composition. This event will be able to protect the panel from excessive absorption of colorful composition. After the surface of the panel dries, they can be painted with a paint that is soluble in water.
Panels with paper coatings can also be painted with this type of paint, using a roller, for this you do not need to apply a solution from glue.