If the old parquet is not pleasing with its color, and its replacement was not included in your immediate plans – it is worth thinking about the purchase of special tinting agents. These include staining and colored varnishes, specially designed for this oil and wax. And if the use of varnish gives only surface protection, then the use of oil guarantees not only protection against moisture, but also an improvement in the wear resistance of wood. In addition, the last option is environmentally friendly, due to the presence of natural products in the composition. Consider more carefully the process of working with colored oil.
Before you purchase something, it is necessary to solve for yourself-what effect you need to get in the end. If the preservation of the natural color of wood is relevant, you should limit yourself to applying a double layer of the finish coating. This will require only colorless oil and hard wax. Another thing is if tinting is necessary to simulate valuable breeds or to give a floor of bright colors. In any case, it is advisable to carry out trial staining using an inconspicuous coating area for these purposes.
The staining process itself consists of the processes of preparing the surface and tinting. For the finish layer, colorless oil and solid wax are used. If the old floor is significantly and sedimented, it differs in noticeable defects or layers, it is pre -polished.
Tinting oil is evenly applied with a roller or brush, strictly along the fibers. Before applying an additional layer, the surface is dried for 12 hours. The principle of applying the finish coating is similar. The flaws in the application can be corrected for half an hour after application, after 12 hours the floor is re -processed. You can walk on the floor even the next day, but the final strength is achieved only in two weeks.
There are various materials that are used in the production of roofs and usually intensify with polyurethane sealant, coatings and membrane seals.