The shield parquet is most often made from the coniferous substrate, the front layer, all this is a multi -layer structure. After loading into containers in Yekaterinburg and transported to different countries for sale. A superficial or front layer is made of valuable wood. The shield itself can have different sizes that vary from 400 to 800 millimeters. This is usually a square structure, but there are also polygonal, rectangular, round. The thickness of the shield is from 15 to 40 millimeters. On all sides of such a shield there is a special groove that is arranged for assembly. The shield is also assembled to connecting dowels.
The base of the shield should be thick and massive. It is made of boards, such as pine or wood -fiber plates. Pine boards glue in two layers so that the direction of the fibers in the layers does not match. It is this design that allows the parquet to remain strong, durable and reliable for a long time for a long time. Wood of more valuable species is simply glued to the base itself. Quite often, the parquet is made of several wood species, this allows you to perform a certain pattern.
The drawing can be diverse, from simple to the most difficult. In the factory, the shields are covered with varnish, thus, the shield parquet is released completely ready for laying and operating. Such a parquet structure allows you to save enough to save on work, time and cost of the floor. There is a small flaw in the floor. The fact is that when laying is quite difficult to keep a right angle.
And if the angle is not straight, then the cracks may form. When laying a parquet, it is necessary to pay attention to the fact that it will be much cheaper to replace the individual components of the piece parquet than replace the entire shield. Therefore, it will be easier and more convenient to replace individual elements.