Loopy Ideas Forum Extraordinary / Unusual / Weird Ideas, Products & Inventions
Please login or register.

Login with username, password and session length
Advanced search  


We are no longer accepting new registrations due to a flood of spammers

Pages: [1]   Go Down

Author Topic: First manned flight of FanWing aircraft planned for 2013  (Read 4089 times)

Jay Sadie

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 225
  • Owner/Founder
First manned flight of FanWing aircraft planned for 2013
« on: July 24, 2012, 01:19:25 AM »

[float=right][smg id=603 width=400][/float]With a traditional airplane, a propellor or jet engine pulls it forward, and lift is created as air subsequently flows over the wings. FanWing aircraft are a little different. They have a powered horizontal rotary fan along the leading edge of their single wing, which serves to pull air over it, creating lift without the need for speed. Britain’s FanWing company has been developing the technology since 1999, and has already had success with radio-controlled proof-of-concept models. This month, however, the company announced that it plans to debut a two-seater piloted FanWing aircraft at the 2013 EAA AirVenture air show in Oshkosh, Wisconsin.

First of all, why would anyone want to build an airplane this way?

According to the company, due to the fact that little in the way of speed is required to achieve lift, FanWings can take off and land on very short runways. They are also said to be inexpensive and simple to build, maintain and control; are stable and resistant to turbulence; they won’t stall at low speeds; and, they’re quiet. Should their engine conk out, their glide ratio is reportedly rather low, although they are still capable of performing an auto-rotational landing.

The piloted aircraft is planned to have a rotor measuring 32 feet (10 meters) long by 30 inches (75 cm) wide, with a total body span (including its twin tails) of 46 feet (14 meters). It will weigh 770 pounds (350 kg) empty, and have a maximum take-off weight of 1,300 pounds (600 kg). Its flight speed will be 20 to 70 knots (23 to 80.5 mph), and it should be able to take off within a distance of 50 feet (15 meters). Power will be supplied by a four-stroke Rotax 912 light aircraft motor.

[float=right][smg id=602 width=400][/float]The piloted FanWing aircraft has a planned width of 46 feet (14 meters)

The FanWing concept was first conceived by American inventor Patrick Peebles, who now heads the company. He is developing the piloted aircraft with a number of collaborators, including former BAE Systems Principal Concepts Engineer George Seyfang.

A small-scale static wind tunnel model has already been built and tested, with construction of the flying prototype scheduled to take place from August to November 2012, followed by the first test flights beginning next February 2013. This is definitely one to watch.

Source: FanWing via Dvice

[smg id=604 width=400 caption="An envisioned multi-passenger FanWing aircraft"] [smg id=605 width=400 caption="An illustration showing how the FanWing rotary fan creates lift"]
« Last Edit: July 24, 2012, 01:36:55 AM by Jay Sadie »
"I do not think there is any thrill that can go through the human heart like that felt by the inventor as he sees some creation of the brain unfolding to success." - Nikola Tesla
Pages: [1]   Go Up

Copyright © 2010 2019, LoopyIdeas.com